Sequence Valves

Unavailable online

Typical application for the PSO or PSC sequence valve is for a high/low application like a log splitter where the spring chamber can be vented externally (spring chamber pressure directly adds to the pilot pressure required to shift the valve). Typical application for the PWI sequence valve is for controlling the lip on a dock leveller. Typical application for the PWE sequence valve is for a high/low pump in a positive traction circuit where the valve automatically shifts to low speed high torque mode. Typical application for the PSI sequence valve is when starting against load where the spring chamber can be vented externally (spring chamber pressure directly adds to the pilot pressure required to shift the valve). Typical application for the PSA is a hydraulic brake release of a spring loaded single acting cylinder. Typical application for the PSS hot oil shuttle is to divert fluid from the low pressure side of a closed loop hydrostatic transmission for cooling or filtering.

Code	LPM	BAR	Size	Datasheet	.STP	.DXF
D-DGPSA	38	210	10
	4 Way N.C. Ext. Pilot2 Way N.C. Ext. Pilot3 Way N.O. Int. Pilot2 Way N.O. Ext. PilotHot Oil ShuttleN.O. Ext. PilotN.C. Ext. PilotN.C. Ext. PilotInt. Pilot DrainN.C. Int. PilotInt. Pilot Rev. Free Flow
D-DGPSC	38	210	10

D-DGPSI	38	210	10

D-DGPSO	38	210	10

D-DGPSS	45	210	10

D-DGPTC	38	210	10

D-DGPTO	38	210	10

D-DFPWE	38	210	10

D-DFPWI	30	210	10

D-SLPWA	150	240	16

D-SLPWB	150	240	16

Warning: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.

Your basket

Sequence Valves

Other products you might like

Double Pilot Operated Check Valves

Priority Flow Regulator Valves

Shut Down Valve

Pilot Operated Relief Valves

Rotary Valves

Differential Relief Valves

Proportional 2 Way Compensated Valves

Check with Thermal Relief Valves